Blue Mountain Insulation
CALL US NOW: 610-972-5130


Many homeowners inquire about removing the old insulation from their attic, rarely is this necessary. The only time we recommend removing old insulation is when the insulation has been fire damaged, water damaged or heavily infested with rodents.

Most homes have some old or “existing” attic insulation already in their attic. Typically we just add more insulation to what you already have in order to bring the attic up to an R-60 rating. The existing insulation may be dusty,  it doesn’t contain asbestos nor contain anything that wouldn’t be rendered safe once new and fresh material is installed over it. Also, there’s no chemical interaction or problem with mixing various insulation materials either. We actually can save you money by using your existing insulation as a base and installing enough additional material over it to bring the attic up to R-60.

In the rare instances where insulation removal is required, we hand-remove the fiberglass rolls and pack them in bags that are carefully removed from your attic. If the attic has blown material, we use a large vacuum to remove all the material. The vacuum is outside the house and this creates a “negative pressure” in the attic such that air is being drawn up into the attic, this ensures a clean job where little or no debris enters the home.

Vacuuming and removal is a very labor-intensive and time-consuming task. it may take 1-2 days to complete. Usually it takes longer to remove the insulation.